Product introduction：
This mixer is broadly applied for the solid-solid (powder to powder) and solid-liquid (powder to liquid) and liquid-liquid (liquid to liquid) mixings in food, pharmacy, chemical industry, fertilizer, oil field, oil refining, animal remedy, coating, pigment, dyestuff and assistant, metallurgy, smelting, fireproof material, mine, building material, battery, electronic plastic, fodder, cultivation, biological project, health product, ceramic, glass, new material, nuclear material etc. trades. This mixer is greatly suited with mixed materials, will produce no lamination and maceration phenomenon to the mixing combined with thermo-sensitive materials and holds a good suitability to the mixing of rough materials, fine grains and extra-fine powders etc. various grains, fibers or lamellate materials.

Working principle：
The quick autorotation and revolution of the two

non-symmetric spires of the mixer makes the material lifted upward to form two non-symmetric spiral material streams from the lower to the upper along with the bucket wall (see Fig. A and B). The revolution movement of the spire driven by the rotating arm makes the material outside of the spire enter the stud envelope line in various degrees, some is mal-positioned lifted and some is thrown out of the stud so as to get the material on the full circumferential orientation continuously renewed and dispersed, the two material streams lifted to the upper are gathered towards the central countersink to form one downward material stream, supplementing the cavity on the bottom so as to form a contra-flow cycle (See Fig. A, B, C, D, ). Because of the compound of the above movements, the materials get quick evenly mixed and hold a higher mixing degree (see Fig. E, F).

Standard Features:

●Volume: 200-3000L
 ●Stainless Steel or Carbon Steel
●Ribbon & Screw agitator for bottom discharge
●Designed for normal temperature and normal atmospheric pressure
●Feed Nozzle
●Dust Nozzle    
●Manually operated or Pneumatic operated dislocated valve        
●Packing Seal        
●Safety limit switch on man hole    

Optional Features:
 ●Carbon Steel, Stainless Steel 304, Stainless Steel 316L
 ●Internal pressure                  
 ●Sanitary type construction                  
 ●Dislocated valve, butterfly valve, slide gate valve, ball valve
 ●Horsepower to suit higher density materials                  
 ●Explosion-proof motorsControls such as variable frequency drives, motor starters and operator stations are available                  
 ●Spray nozzles for liquid introduction
 ●Jacket for heating or cooling